Corso Milano 14
20837 Veduggio con Colzano
Tel ++390362910763
Fax ++390362911255
www.dgts.it - e-mail: info@dgts.it
Pec: dgts@legalmail.it
Codice Fiscale e Partita Iva IT 10785460154 - Registro delle Imprese 10785460154 - REA MB 1407783 - Cap. Soc. € 90.000,00 I.V.
Automotive
Cosmetica
Alimentare
Metalli
Carta e Cartone
Plastica
Gomma
Tessuti
Edilizia
Farmaceutico
Medicale
Packaging
Tubi PE-PVC
Molle
Adesivi
Provini
Microscopi

Compression Tester MiniVAL

Compression Tester of Packaging MiniVAL

 
Compression and Deformation Resistance Testing Machine produced by the compression of the samples between two parallel plates and with controlled movement from the PC to the rupture of the samples tested.
It also allows to perform constant compression tests on the samples during a programmed time.
Fatigue Cycle tests to carry out research on containers and packaging.

Standards

ASTM D2412ASTM D2659-16ASTM D4169ASTM D4577ASTM D642ASTM D7030DIN 11093-9DIN 16495:2013-12

DIN 55440DIN 9969EN 16495EN 8113EN 9969ISO 11093-9ISO 16495ISO 8113ISO 9969

 

Force Range 10 KN (2,000 lbf)

– System Measure Force 3 Load Cells (to avoid lateral loading errors) 0.03% FSD
– DC Drive System – Trial Speed Variator
. Deformation Measurement Encoder, precision 0.25 mm (0.01 in.)
– Resolution in force: 1 N (0.25 lbf.) / Resolution of electronic capture 0.33 N
– Plate displacement resolution: 0.01 mm (0.0004 in.)
– Mobile plate speed resolution: 2 mm / min. (0.1 in./min.)
– Flatness of plates: Flat within 0.25 mm (0.01 in.)
– Parallelism of plates: Parallelism within ± 1 mm (± 0.04 in.) Per meter

 

– Features Safety: E-Stop – Overload Protection Software – Switches (Switches), upper and lower limit limiters – Power Supply Protection Limit – Load sense with automatic return
– Detection Fault communication with automatic stop
– Test Speeds 1 – 400 mm / min (0.04 – 15.7 in./min.)
– Return Speed Plate 400 mm / min. (15.7 in./min.)
– Force Data Display – Displacement – Speed - Load Ratio – Elapsed Time
– Guiding the mobile plate by means of guided columns
– The test equipment is mounted on 4 silent-blocks that prevent noise and vibrations
– RS-232 interface
– Force Measurement – Selectable Units: Newton’s – Kg & Pounds
– Measurement of Extension (Deformation samples tested) Units selectable: millimeters and inches

Maggiori Informazioni