Corso Milano 14
20837 Veduggio con Colzano
Tel ++390362910763
Fax ++390362911255
www.dgts.it - e-mail: info@dgts.it
Pec: dgts@legalmail.it
Codice Fiscale e Partita Iva IT 10785460154 - Registro delle Imprese 10785460154 - REA MB 1407783 - Cap. Soc. € 90.000,00 I.V.
Automotive
Cosmetica
Alimentare
Metalli
Carta e Cartone
Plastica
Gomma
Tessuti
Edilizia
Farmaceutico
Medicale
Packaging
Tubi PE-PVC
Molle
Adesivi
Provini
Microscopi

Crush Tester CDM-5

Crush Tester of Corrugated Board and Paper Samples CDM-5

 

The Crush Tester is used to measure the compressive strength of paper samples (Liner & Medium) Corrugated Board

CMT - RCT - CCT - ECT - FCT - PAT

New generation of Crush Testert controlled by microprocessor. The suitable sample holder (ECT – RCT – CCT – PAT …) with the test piece is placed in the center of the bottom plate of the compresometer. The lower plate is mobile and the compression force is captured by a precision load cell, coupled to the upper plate.

The results of the tests are shown on the 15 ” Laptop PC . If series of tests are carried out with the same type of sample, statistical results, average value and standard deviation are obtained. During the tests the Compressometer works at a very low speed, but when finishing and resetting, the return of the mobile platform to its initial test position is at the maximum speed (125 mm / min).

The specimen compression test equipment meets the specifications of the standards:

ECT test: APPITA / AS 1301.444s, DIN EN ISO 3037, FEFCO 8, ISO 13821, SCAN P33, TAPPI T 811, TAPPI T 823, TAPPI T 838, TAPPI T 839
FCT test: APPITA / AS 1301.429s, DIN EN ISO 3035, FEFCO No.6, SCAN P32, TAPPI T 825
RCT test: APPITA / AS 1301.407s, ISO 12192, SCAN P34, TAPPI T 822
CMT test: APPITA / AS 1301.434s, ISO 7263, SCAN P27, TAPPI T809
CCT test: SCAN P42, TAPPI T 843, UNE ISO 16945
PAT test: APPITA / AS 1301.430s, FEFCO No. 11, TAPPI T 821

Standards

DIN 16945DIN 3035DIN 3037DIN 54518DIN 7263EN 3035EN 3037EN 7263FEFCO 11FEFCO 6FEFCO 8

FEFCO C.M.T. TestISO 12192ISO 13821ISO 16945ISO 3035ISO 3037ISO 7263ISO 9895

 

Caratteristiche Tecniche:

  • 15 “laptop PC for data acquisition and control
    LYNX software – COMPRESSION tests (*) CMT-CCT-RCT-ECT-FCT-PAT
  • Robust and easy to use construction
  • With regulation of test speeds from the PC: between 3 and 125 mm / min
  • USB interface for PC connection
  • Improve your ISO 9000 Quality System
  • Elimination of human errors
  • Languages included: Spanish – English – German and French
  • Force range from 10 to 5000 N (resolution 0.01% = 0.5N)
  • Selectable units in N – Kg and lb
  • Standard statistics: Minimum Values – Maximum, Mean and Standard Deviation
  • Functions: Save – Print – Copy to Clipboard
  • Automatic return of movable plate after each test to initial position
  • Digital encoder to measure the deformations of the samples during the tests in mm or inches
  • Overload protection
 Maggiori Informazioni